How to Set Up Your NOMAD Base & Stand Wireless Charging Station for iPhone and Apple Watch

If you own both an iPhone and an Apple Watch, you know the daily ritual of juggling multiple cables and chargers. A dedicated charging station can simplify your nightstand or desk, and NOMAD’s Base & Stand Wireless Charging (with Apple Watch) is designed to do exactly that. This guide walks you through the unboxing, setup, and daily use of your NOMAD charging station so you can keep your devices powered up without the clutter.

Whether you are new to wireless charging or upgrading from a single-device pad, the NOMAD Base & Stand offers a sleek, all-in-one solution. In this article, we cover everything from connecting the power supply to positioning your Apple Watch charger, plus tips to get the fastest charge possible. By the end, you will have a tidy, efficient charging setup that works with your existing NOMAD accessories.

Unboxing and What’s Included

When you open the NOMAD Base & Stand Wireless Charging (with AW) box, you will find the main charging stand, a dedicated Apple Watch puck holder, and a power adapter. The stand itself is crafted from a single piece of aluminum with a soft-touch silicone surface that prevents your devices from slipping. The Apple Watch charger is not built-in; instead, NOMAD provides a precision-milled cavity where you insert your own Apple Watch magnetic charging cable. This design keeps the stand future-proof and compatible with any Apple Watch model.

Also in the box is a high-quality USB-C cable and a power adapter. NOMAD recommends using the included adapter to ensure optimal charging speeds. If you lose or need a replacement, the NOMAD Adapter - Power Supply is available separately and works seamlessly with the stand. The stand also features a built-in cable management channel on the underside, so you can route the Apple Watch cable neatly out of sight.

• Check that your Apple Watch charger (the magnetic puck) is the official Apple version for best compatibility.
• Keep the box’s foam insert to store the stand if you travel or move it between rooms.

Step 1: Connect the Power Adapter and USB-C Cable

Begin by plugging the included USB-C cable into the power adapter, then connect the other end to the USB-C port located on the back of the NOMAD Base & Stand. The stand uses a single USB-C input to power both the iPhone charging pad and the Apple Watch charging module. Once connected, plug the adapter into a wall outlet. A small LED indicator on the front of the stand will illuminate briefly to confirm power.

For the fastest wireless charging, use the power adapter that came with the stand. Third-party adapters may not deliver enough wattage, which can slow down charging or cause intermittent connection. If you need a longer cable, the NOMAD USB C Cable - 3.0M | USB C | Kevlar | V3 | White is a durable, braided option that supports fast data and charging speeds.

• Always plug the adapter directly into a wall outlet rather than a power strip or extension cord for consistent power delivery.

Step 2: Install Your Apple Watch Charging Puck

The NOMAD Base & Stand includes a removable Apple Watch charging module. To install it, slide your Apple Watch magnetic charging cable through the cutout on the back of the stand, then snap the puck into the designated recess on the top of the stand. The module holds the puck securely at a comfortable viewing angle, making it easy to see the time or notifications while charging. Route the cable through the channel underneath the stand to keep your desk tidy.

If you own an Apple Watch Ultra or a larger model, the stand accommodates watches up to 49mm without issue. For those who prefer a different band style, the NOMAD Tempo Band - 49mm | Crush pairs beautifully with the stand’s clean aesthetic. The module is designed to work with any official Apple Watch charger, so you can swap it out if you upgrade your watch in the future.

• Ensure the Apple Watch cable is fully seated in the channel to avoid pinching or damaging the wire.
• Test the angle by placing your watch on the charger — it should sit flat and not wobble.

Step 3: Position Your iPhone for Wireless Charging

The main charging pad on the NOMAD Base & Stand supports Qi wireless charging for any compatible iPhone. Simply place your iPhone face-up on the silicone pad, aligning the center of the phone with the charging coil indicator (usually marked by a subtle circle or logo). The stand charges through most slim cases, including NOMAD’s own cases. For example, the Sport Case - iPhone 14 Plus | Lunar Gray works perfectly without needing to remove the case.

The stand’s angled design allows you to use your iPhone while it charges — perfect for watching videos, taking FaceTime calls, or checking notifications. The non-slip silicone surface keeps the phone in place even if you tap the screen. If you have an iPhone with MagSafe, the stand does not magnetically lock, but the charging speed remains the same as standard Qi (up to 7.5W for iPhone). For faster charging, consider a dedicated MagSafe puck, but the NOMAD stand is ideal for overnight or desk charging.

• Remove thick or metal-backed cases before charging, as they can interfere with the wireless signal.
• If your phone does not charge, try repositioning it slightly — the charging coil is near the center of the device.

Step 4: Optimize Your Charging Routine

To get the most out of your NOMAD Base & Stand, develop a consistent charging habit. Place your iPhone and Apple Watch on the stand every night before bed. The stand’s built-in overcharge protection prevents damage to your devices, so you can leave them on the charger safely. Over time, the silicone surface may attract dust — simply wipe it with a slightly damp microfiber cloth to keep it clean.

If you travel frequently, consider pairing the stand with a compact power adapter and a spare NOMAD USB C Cable - 3.0M | USB C | Kevlar | V3 | White for your bag. The stand itself is portable enough to fit in a carry-on, though you will need to remove the Apple Watch module for packing. For a complete travel kit, NOMAD also offers the Rugged Keychain - AirTag | Lumen | v2 to keep track of your gear.

• Use the stand’s cable management channel to keep the Apple Watch cable from tangling with other wires.
• If you notice slow charging, check that your power adapter is rated for at least 18W output.

Troubleshooting Common Issues

If your iPhone does not start charging, first ensure the power adapter is plugged in and the LED on the stand is lit. Then, check that your iPhone is centered on the charging pad. Some cases with pop sockets or thick grips may prevent contact. If the Apple Watch does not charge, verify that the magnetic puck is properly seated in the module and that the cable is fully connected to the power source. The stand does not include a dedicated Apple Watch charger, so you must use your own.

For users who experience intermittent charging, try using a different power adapter or cable. The NOMAD Adapter - Power Supply is recommended for consistent performance. If the stand itself feels warm during use, that is normal — wireless charging generates some heat. However, if it becomes excessively hot, unplug it and contact NOMAD support. Regular cleaning of the silicone pad and the Apple Watch module will also prevent debris from interfering with charging.

• Restart your iPhone or Apple Watch if they fail to recognize the charger.
• Keep the stand away from direct sunlight or heat sources to avoid performance issues.

Setting up your NOMAD Base & Stand Wireless Charging (with AW) is straightforward and takes only a few minutes. With a clean cable management system and a design that works with both iPhone and Apple Watch, it is a smart addition to any desk or nightstand. To complete your charging setup, explore the NOMAD USB C Cable - 3.0M | USB C | Kevlar | V3 | White for a durable, matching cable that complements your stand perfectly.